Instant overload release systems with Microfine adjustment.
Single Point axial adjustment.
Centralised Air Cooling system (optional).
Instant Autotrip Dejamming system.
Roller Lifting Arrangement
Interchangeability of the Rollers.
Top lifting arrangement of high speed and slow speed Rollers.
Cardan Gear Box and Drive
Specially designed cardan shaft gear with twin output.
Heavy universal joints.
Sturdier Coupling arrangement.
Heavy Type microdial.
OTHER SALIENT FEATURES
Novel design of cutting unit eliminates wear out effect of "U" Frame.
Compact and sealed bearing and Housings.
Low height Cutting Unit.
Smooth following wider conveyors with side seals to minimize spillage.
Centralised Cooling.
Self Clearing cover.
PVC Belt.
FEATURES OF TEAMASTER MAGNUM CTC MACHINE
FEED & INTERMEDIATE CONVEYORS:
Simultaneous Spread Thickness Adjuster.
Ferrite/Ceramic Magnets.
Wider Belt.
Deep Feed Hoppers.
Full length spill guards.
Narrow scrapers.
Sealed Bearing blocks.
Low Belt Inclination.
Auxiliary return belt scraper to clean residual 'MAL' cleaning from belt surface.
CUTTING UNITS
Novel design of cutting unit eliminates wear out effort of 'U' Frame.
Compact and sealed bearing housing.
Heavy microdial blocks.
Top lift for both H.S. & S.S. Rollers.
Overload release with fine tuning cut adjustment.
Housings are tracked in precise guides and not bolted to frame.
H.S. & S.S. rollers are interchangeable with each other.
Axial adjustment provided on S.S. Roller at single point.
Heavy duty propellers Shafts.
Drive assembly on sturdy frame.
Low height of cutting unit.
TEAMASTER MAGNUM CTC MACHINE SPECIFICATIONS
MACHINE SIZE
76 cm ( 30")
91 cm ( 36")
1. Overall Width
2480 MM
(97")
2580 MM
(101")
2. Overall Length
SINGLET
4090 MM
13 ' 5"
DUPLEX
6415 MM
21 ' 9/16"
TRIPLEX
8740 MM
28 ' 8 3/32"
QUADRUPLEX
11065 MM
36' 3 5/8"
3. Motor KW (HP) Suggested
1st CUT
18.5 ( 25 )
22.0 ( 30 )
2nd CUT
15.0 ( 20 )
18.5 ( 25 )
3rd CUT
15.0 ( 20 )
18.5 ( 25 )
Power requirement depends upon leaf condition, wither, severity of cut type of processing.
High Speed Roller RPM 600 ( Roller Speed can be changed as per customer's option)
Slow Speed Roller RPM 60
4. Capacity per Hour
For 76 cm (30") Machine - 800 - 1000 Kgs.
For 91 cm (36") Machine - 1000 - 1200 Kgs.
SEGMENTS
Standard Material
As per IS 201 SS Also IS 301/304
(Optional) Forged 330 mm (13") dia
Tooth Profile
8 TPI, 80 Helical, 65°
Minimum Diameter of
10 TPI, 80 Helical, 65°
Usable Segment
292 mm ( 11 1/2")
Net Weight in Kg. Of TEAMASTER 'MAGNUM' CTC MACHINE INCLUDING MOTOR & DRIVES
Machine Size
76 cm ( 30")
91 cm (36")
SINGLEX
2200
2350
DUPLEX
3980
4280
TRIPLEX
5760
6210
QUADRUPLEX
7540
8140
Salient Features
Feed hopper with spreader
Magnet for removal of unwanted materials
Instant overload release system with microfine adjustment.
Single point axil adjustment
Interchangeable Rollers
Dejamming arrangement with fine tuning knob
PVC belt optional
Novel design for cutting unit eliminate wearout effect of 'U' Frame
Compact and sealed Bearing Housings.
Low heigh cutting units
Smooth flowing wider conveyors with side seals to minimise spillage.
Clutch operation from either side
Top openable cutting unit
Roller lifting stand
Roller cooling system (optional)
Self cleaning cover (optional).
Specially designed Carden Shaft Gear with twin output.
Double Joint Heavy Universal Joints.
Dynamic Coupling arrangement
Heavy type Microdial
61cm(24")
76cm(30")
91cm(36")
12cm(48")
1.
Overall Width
2310
7'6 15/16"
2460
8 27/32"
2560
8'4 25/32"
2765
9' 27/32"
2.
Overall Length
Singlet
4090
(13'5")
Duplex
6415
(21' 9/16")
Triplex
8740
(28'8 3/32")
Quadruplex
11065
(36'3 5/8")
Quintuplex
13390
(43'11 5/32")
3.
Motor KV (HP) :
Suggested
1st cut
15(20)
15(20)
18.5(25)
22(30)
2nd cut
11(15)
15(20)
15(20)
18.5(25)
3rd cut
11(15)
11(15)
15(20)
18.5(25)
Power requirements depends upon leaf conditions, wither, severity of cut and type of processing.For Quadruplex second cut machine will have motor identical to first cut.
High speed roller RPM :
720
Slow speed roller RPM :
72
Segments :
Standard Material
(optional)
As PER IS 201 also 301/304
Forged 21 cm (8 1/4)dia and 24cm
9 1/2" dia
Tooth Profile
8 TPI, 50 Helical,65°
Minimum Diameter of Usable Segment
17.5 cm
Optional Range
Cast Segments
216 mm DIA. SEGMENTS
10 TPI TOOTH PROFILE
EITHER U OR V 45° CHASING
50, 60 or 70 MILLED HELICAL GROOVES
Capacity per hour
61 cm
76 cm
91 cm
122 cm
(24")
(30")
(36")
(48")
600kg
800kg
1000kg
140kg
Above figures are for typical UK type cut with 72% wither conditions. Figures will change depending upon leaf conditions, wither, severity of cut, type of processing etc.
