TEAMASTER  MAGNUM / CLASSIQUE  CTC MACHINE          



The Original Teamaster CTC Series

Features

  • Feed hopper with spreader.

  • Magnet for removal of unwanted materials.

  • Instant overload release systems with Microfine adjustment.

  • Single Point axial adjustment.

  • Suction Cooling in each cut.

  • Dejamming arrangement with fine turning knob.

Roller Lifting Arrangement

  • Interchangeable of the Rollers.

  • Top lifting arrangement of high speed and slow speed Rollers.

Cardan Gear Box and Drive

  • Specially designed cardan shaft gear with twin output.

  • Heavy universal joints.

  • Sturdier Coupling arrangement.

  • Heavy Type microdial.

OTHER SALIENT FEATURES

  • Novel design of cutting unit eliminates wear out effect of "U" Frame.

  • Compact and sealed bearing and Housings.

  • Low height Cutting Unit.

  • Smooth following wider conveyors with side seals to minimize spillage.

  • Centralised Cooling.

  • Self Clearing cover (optional).

  • PVC Belt (optional).

FEATURES OF TEAMASTER MAGNUM CTC MACHINE

FEED & INTERMEDIATE CONVEYORS:

  1. Simultaneous Spread Thickness Adjuster.

  2. Ferrite/Ceramic Magnets.

  3. Wider Belt.

  4. Deep Feed Hoppers.

  5. Full length spill guards.

  6. Narrow scrapers.

  7. Sealed Bearing blocks.

  8. Low Belt Inclination.

  9. Auxiliary return belt scraper to clean residual 'MAL' cleaning from belt surface.

CUTTING UNITS

  1. Novel design of cutting unit eliminates wear out effort of 'U' Frame.

  2. Compact and sealed bearing housing.

  3. Heavy microdial blocks.

  4. Top lift for both H.S. & S.S. Rollers.

  5. Overload release with fine tuning cut adjustment.

  6. Housings are tracked in precise guides and not bolted to frame.

  7. H.S. & S.S. rollers are interchangeable with each other.

  8. Axial adjustment provided on S.S. Roller at single point.

  9. Heavy duty propellers Shafts.

  10. Drive assembly on sturdy frame.

  11. Low height of cutting unit.

TEAMASTER MAGNUM CTC MACHINE SPECIFICATIONS

MACHINE SIZE

 

76 cm ( 30")

91 cm ( 36")

1. Overall Width

2480 MM

(97")

2580 MM

(101")

2. Overall Length

 

 

SINGLET

4090 MM

13 ' 5"

DUPLEX

6415 MM

21 ' 9/16"

TRIPLEX

8740 MM

28 ' 8 3/32"

QUADRUPLEX

11065 MM

36' 3 5/8"

3. Motor KW (HP) Suggested

 

 

1st CUT

18.5 ( 25 )

22.0 ( 30 )

2nd CUT

15.0 ( 20 )

18.5 ( 25)

3rd CUT

15.0 ( 20 )

18.5 ( 25 )

Power requirement depends upon leaf condition, wither, severity of cut type of processing.
High Speed Roller RPM 600 ( Roller Speed can be changed as per customer's option)
Slow Speed Roller RPM 60

4. Capacity per Hour

For 76 cm (30") Machine - 800 - 1000 Kgs.

For 91 cm (36") Machine - 1000 - 1200 Kgs.

 

SEGMENTS

Standard Material

As per IS 201 SS Also IS 301/304
(Optional) Forged 330 mm (13") dia

Tooth Profile

8 TPI, 80 Helical, 65°

Minimum Diameter of

10 TPI, 80 Helical, 65°

Usable Segment

292 mm ( 11 1/2")

 

Net Weight in Kg. Of TEAMASTER 'MAGNUM' CTC MACHINE INCLUDING MOTOR & DRIVES

Machine Size

76 cm ( 30")

91 cm (36")

SINGLEX

2200

2350

DUPLEX

3980

4280

TRIPLEX

5760

6210

QUADRUPLEX

7540

8140

       TEA MASTER CLASSIQUE CTC MACHINE      




Salient Features

  • Feed hopper with spreader

  • Magnet for removal of unwanted materials

  • Instant overload release system with microfine adjustment.

  • Single point axil adjustment

  • Interchangeable Rollers

  • Dejamming arrangement with fine tuning knob 

  • PVC belt optional

  • Novel design for cutting unit eliminate wearout effect of 'U' Frame

  • Compact and sealed Bearing Housings.

  • Low heigh cutting units

  • Smooth flowing wider conveyors with side seals to minimise spillage.

  • Clutch operation from either side

  • Top openable cutting unit

  • Roller lifting stand

  • Roller cooling system (optional)

  • Self cleaning cover (optional).

  • Specially designed Carden Shaft Gear with twin output.

  • Double Joint Heavy Universal Joints.

  • Dynamic Coupling arrangement

  • Heavy type Microdial

 

 

61cm(24")

76cm(30")

91cm(36")

12cm(48")

1.

Overall Width

2310
7'6 15/16"

2460
8 27/32"

2560
8'4 25/32

2765
9' 27/32"

2.

Overall Length

 

 

 

 

 

Singlet

4090

(13'5")

 

 

 

Duplex

6415

(21' 9/16"

 

 

 

Triplex

8740

(28'8 3/32")

 

 

 

Quadruplex

11065

36'3 5/8")

 

 

 

Quintuplex

13390

43'11 5/32")

 

 

3.

Motor KV (HP) :

Suggested

 

 

 

 

1st cut

15(20)

15(20)

18.5(25)

22(30)

 

2nd cut

11(15)

15(20)

15(20)

18.5(25)

 

3rd cut

11(15)

11(15)

15(20)

18.5(25)

Power requirements depends upon leaf conditions, wither, severity of cut and type of processing.For Quadruplex second cut machine will have motor identical to first cut.

 

High speed roller RPM :

720

Slow speed roller RPM :

72

Segments :
Standard Material
(optional)

As PER IS 201 also 301/304
Forged 21 cm (8 1/4)dia and 24cm

9 1/2" dia
Tooth Profile

8 TPI, 50 Helical,65°

Minimum Diameter of Usable Segment

17.5 cm

Optional Range

  1. Cast Segments

  2. 216 mm DIA. SEGMENTS

  3. 10 TPI TOOTH PROFILE

  4. EITHER U OR V 45° CHASING

  5. 50, 60 or 70 MILLED  HELICAL GROOVES

Capacity per hour

61 cm

76 cm

91 cm

122 cm

(24")

(30")

(36")

(48")

600kg

800kg

1000kg

140kg

Above figures are for typical UK type cut with 72% wither conditions. Figures will change depending upon leaf conditions, wither, severity of cut, type of processing etc.